ACS 503N SERIES

 

3-Phase AC Voltage Sources, 16 kVA up to 90 kVA

• Frequency (fund.) 40Hz .. 80Hz
• Very low distortion (THD)
• Very high voltage stability
• Output power 16kVA .. 90kVA (depending on model)
• Output voltage max. 300V(p-n)
• Inrush current capability
• Remote control by the DPA 503N via RS232

AIF 503N SERIES

 

Three-Phase flicker impedances up to 75A

• Impedances values as per IEC/EN 61000-3-3 & IEC/EN 61000-3-11
• Non-saturable air coil inductors
• Line voltage 3 x 400V
• Line current up to 75A per phase (depending on model)
• Automatic overcurrent protection
• Status indication by LED
• Remote-controlled by DPA 503N

Coupling / decoupling networks according to IEC/EN 61000-4-6, IEC/EN 60945 and CISPR 15/EN 55015

CDNs - Highlights

Combined 1-phase coupling/decoupling networks for Burst and Surge testing up to 10kV

CNI 501x SERIES - Highlights

CNI 503x SERIES

 

Combined 3-phase coupling/decoupling networks for Burst and Surge testing up to 10kV

• Combined coupler for EFT/Burst and Surge
• Surge as per ANSI/IEEE C62.41 (models CNI 503Bx only, other couplers on request)
• LEDs indicate active mode and coupling
• Automatic selection of Surge impedance
• Fully remote controlled by EM TEST generators
• Meet requirements for 3x690VAC and 1,000VDC

CWS 500N1 SERIES

 

Continuous Wave Simulator, 80W

• Signalgenerator 9kHz to 1GHz
• Amplitude modulation: 1Hz to 3kHz (0% to 95%)
• Pulse modulation: 1Hz - 1kHz (10% to 90%)
• USB-Interface
• Automatic calibration via built-in power meter
• 80W amplifier, 100kHz to 300MHz
• Built-in current monitor, 9kHz to 1GHz
• Connection for external amplifiers up to 1GHz
• Software for Windows Vista & Windows 7

CWS 500N2

 

Continuous Wave Simulator

• Most compact equipment
• Supports BCI testing as per various standard requirements
• Basic frequency range 9kHz up to 400MHz
• Extendable frequency range up to 1GHz
• Built-in 100W class A amplifier up to 400MHz
• Built-in RF switch to connect external amplifier
• Built-in directional coupler
• Built-in 3-channel power meter up to 1GHz

DITO

 

ESD Simulator

• Most ergonomic design
• Light weight (940g)
• Interchangeable discharge tips
• Interchangeable R/C networks
• Power booster to perform long duration tests
• Library of standard test routines
• Test voltage measurement and control
• Various test routines for testing and evaluation
• High-sophisticated user guidance by test plans created by esd.control software
• Optional fiber optic link between dito and computer (USB port)

Digital Power analyzer for harmonics & flicker testing

• Full-compliant acc. to JIS 61000-3-2 (Japanese standard)
• Edition 3 compliant for Class A
• Class X for special measurements
• Variable limit values
• Real-time data acquisition
• Internal hard disk for data storage
• Separate input for voltage and current
• Wide-range current input
• Built-in lumped flicker impedance
• USB interface for control and data transfer
• Control and analyzing software for Windows Vista and Windows 7

3-Phase Digital Power Analyzer for harmonics & flicker testing

• Real-time data acquisition
• Internal hard disk for data storage
• 16-Bit A/D converter
• 6 input channels

• Wide-range current input up to 140Arms
• Wide-range voltage input up to 530Vrms
• High-sophisticated analyzing capability
• USB interface for control and data transfer

Electrostatic Discharge Simulator up to 30kV

ESD 30N - Highlights

• Test voltage up to 30kV for air and contact discharge
• Discharges up to 20Hz
• Easy-to-change R/C-networks and tips
• Bleed-Off function
• Measurement of temperature and humidity
• AC mains supply and DC supply

• Battery operated
• External trigger function
• USB-interface
• Control and analyzing-software for Windows Vista and Windows 7
• Optional fiber optic link between ESD 30N and computer (USB port)

Single Phase Multifunctional AC/DC Power Sources

Three-phase Multifunctional AC/DC Power Sources

Netwave Series (3 Phase) - Highlights

Oscillatory Wave Simulator

OCS 500N6 - Highlights

• Standalone test generator
• Includes Ringwave up to 6kV
• Includes Damped Oscillator Waves up to 3kV
• Built-in CDN, single phase or three-phase up to 32A

• Front panel operation
• Standard Test routines
• USB and GPIB interfaces

Simulator for slow and fast damped oscillatory waves and Ringwave

OCS 500N6F - Highlights

• Fully automated single box test system
• Single DUT port
• Slow Damped Oscillatory Waves up to 3kV
• Fast Damped Oscillatory Waves up to 4.4kV

• Ringwave up to 6kV
• Built-in CDN, 1-phase or 3-phase up to 32A
• Front panel operation
• USB and GPIB interfaces

PFS 503N SERIES

 

Power Fail Simulators

• Standalone test generator
• Full-compliant three-phase system as per IEC 61000-4-11, Ed.2:2004 and IEC 61000-4-34 for testing delta and star supply systems
• 6 electronic switches, short-circuit protected
• Rated voltage 3x440V
• Nominal current up to 100A per phase
• DC signal to control external variac
• Front panel operation
• Standard Test routines
• USB and GPIB interfaces

Multifunctional testgenerator for transients (EFT/Burst, Surge & Power Fail) up to 5.5kV

• Burst module (IEC/EN 61000-4-4) up to 5.5kV
• Surge module (IEC/EN 61000-4-5) up to 5kV
• TSurge module (IEC/EN 61000-4-5); optional
• PowerFail module (IEC/EN 61000-4-11)
• Magnetic field tests with optional accessoires
• Built-in single phase coupler 300V/16A
• Manual operation from front panel
• USB and GPIB-Bus for remote control
• Monitor outputs for peak voltage and peak current
• Fail inputs
• External variac control 0-10Vdc
• Control of external three-phase couplers

UCS 500N5E

EFT/Burst Generator up to 5.5kV, IEC/EN 61000-4-4

Highlights

• Fully compliant to IEC 61000-4-4 Am1 Ed.2
• Test voltage up to 5.5kV
• Up to 10,000 pulses per second
• Up to 1,000 pulses per burst
• Built-in single phase coupler 300V/16A

• Manual operation from front panel
• USB and GPIB-Bus for remote control
• Fail inputs
• Control of external three-phase couplers

UCS 500N5P

Power Fail simulator for dips and short inter- ruptions as per IEC/EN 61000-4-11 and -29

Highlights

• Fully compliant to IEC 61000-4-11 Ed.2 as well as IEC 61000-4-29
• Voltage/current up to 300V/32A AC/DC
• Switching time between 1us and 5us
• Inrush current > 500A
• Monitor outputs for voltage and current

• Fail inputs
• External variac control 0-10Vdc
• Magnetic field tests with optional accessoires
• Manual operation from front panel
• USB and GPIB-Bus for remote control

UCS 500N5V

Combination Wave (Surge) Generator up to 5kV as per IEC/EN 61000-4-5

Highlights

• Fully compliant to IEC 61000-4-5
• Surge voltage up to 5kV
• Surge current up to 2.5kA
• Built-in single phase coupler 300V/16A
• Programmable current limiters
• Monitor outputs for peak voltage and peak current

• Standard and user test routines
• Manual operation from front panel
• USB and GPIB-Bus for remote control
• Fail inputs
• Control of external three-phase couplers
• Pulse magnetic field tests with optional accessoires

UCS 500N7

 

Multifunctional testgenerator for transients (EFT/Burst, Surge & Power Fail) up to 7kV

• Ultra-Compact Simulator up to 7.0kV
• Burst module (IEC/EN 61000-4-4)
• Surge module (IEC/EN 61000-4-5)
• PowerFail module (IEC/EN 61000-4-11)
• Ringwave module (IEC/EN 61000-4-12) optional
• Telecom Surge Module (IEC/EN 61000-4-5) optional
• Magnetic field tests with optional accessories
• Built-in single phase coupler 300V/16A
• USB and GPIB-Bus for remote control
• Manual operation from front panel
• Monitor outputs for peak voltage and peak current
• Fail inputs
• External variac control 0-10Vdc
• Control of external three-phase couplers

VCS 500N8

8kV Combination Wave Simulator

Highlights

• Surge voltage up to 8kV
• Surge current up to 4kA
• Voltage/current monitors
• Built-in CDN 1-phase or 3-phase up to 3 x 690V and 32A

• Interlock
• Warning lamp control
• Manual operation
• USB and GPIB interface

VSS 500N10.3

Highlights

• Surge voltage up to 10kV
• 7 different capacitance ranges selectable from 30nF to 180nF
• Generator compliant to IEC/EN 61730-1/2
• Peak voltage measurement

• Interlock
• Warning lamp control
• Manual operation
• USB and GPIB interface

For more information contact us