EMC Emission Fully Compliant Reciever!

	PMM 9010 EMC EMI Receiver 10Hz - 30 MHz. We are pleased to announce the new DIGITAL EMC EMI RECEIVER and ANALYZER fully CISPR compliant, in the 10 Hz - 30 MHz frequency range. For more info please Contact Us !!!

Only Pay for what you need! 30Mhz or 3Ghz

PMM 9030 EMC EMI Receiver 30 MHz - 3 GHz. We are pleased to announce the new DIGITAL EMC EMI RECEIVER fully CISPR compliant, in the 30 MHz - 3 GHz range, that extends the PMM 9010 up to the field of radiated emissions frequency range. A fast and safe connection with PMM 9010 is guaranteed by a high speed optical link, providing a complete immunity of transferred data. For more info please Contact Us !!!

Line Impedance Stabilization Networks (LISN)
Available in any size and for any line, these Line Impedance Stabilization Networks are fully compatible with all PMM receivers and, driven by PMM emission software, are the perfect complement in any automatic system.	63 Amps and 100 Amps models available !!

Antennas and Accessories

ACTIVE ROD ANTENNA RA-01
	RA-01 is designed to provide a good solution to measure low level fields from 10 kHz to 30 MHz. It is a good companion of all receivers or spectrum analyzers to cover lower bandwidth application. A wide range of antenna systems is also available. Each antenna is individually calibrated. Until 50 MHz the monopole antenna (active and passive rod) are calibrated with the substitution method. The loop antennas are calibrated inside an anechoic chamber by measuring the current in a primary loop and calculating the induction field. The loop to be calibrated is placed in this known field and the antenna factor is measured.

Accessories

A wide range of accessories such as: Antennas, High Voltage Probes, Absorbing Clamps, Near Field Probes, Preamplifier, and other complete the range of products. This will enable the operator to always have the correct set-up for any EMC standard. Several accessories enlarge the capability of the systems in any test condition to offer a useful tool either to achieve the CE mark or for design debugging and pre-qualification testing.

EHP-50PALM Pocket PC control for EHP50A/B

Low cost solution to measure low frequency magnetic or electric fields with the HP iPAQ h 2210 Pocket PC connected to your EHP-50. Both digital and analog data reading available. Spectral analysis with double marker capability. Secure Digital Card for data saving, and more... Contact Us !! for more details!

 

8053A Portable Field Strength Meter
	New model of the PMM 8053, the PMM 8053A, general purpose portable field meter, is the perfect solution for monitoring electric and magnetic fields everywhere: outdoors, at the workplace or at home in a frequency range from 5 Hz to 40 GHz. Major enhancements over the PMM 8053: Internal memory up to 32.700 samples Longer operating time, up to 40 hours Upgrade for PMM 8053 available in factory

8053-SW02 Data Acquisition Software
The PMM SW02 is a software tool that integrates the PMM 8053 Portable Electric and Magnetic Field Meter. Through a simple Personal Computer interface based on WindowsÔ operating system, the PMM SW02 increases the performances and the flexibility of the PMM 8053 greatly facilitating data acquisition, recording and presentation, with a graphical and numerical display of measured data.

 

8055S Field Monitoring Station

The PMM 8055S Field Monitoring Station is the ultimate solution for continuous remote monitoring of electric and magnetic fields in a frequency range from 5 Hz to 40 GHz.   

    

Solar cells rechargeable battery for unlimited operability. Centralized remote control by modem or cellular phone for data exchange. Short Messages alarm System (ie: cellular SMS).

The PMM 8055 station permanently acquires and stores data into the internal memory and when it is interrogated, it transfers them to the PC or to any cellular phone.

 

 

Electric and Magnetic Field Probes up to 40 GHz

All probes can be used either with the PMM 8053A Field Meter or the PMM 8055S Field Monitoring Station. Each probe is individually calibrated with calibration data stored into the internal E2PROM.   Probe Field Frequency Range Level Sensitivity EP-33C Electric 2110 MHz - 2170 MHz 30 V/m 0.03 V/m EP-33B Electric 1805 MHz - 1880 MHz 30 V/m 0.03 V/m EP-33A Electric 925 MHz - 960 MHz 30 V/m 0.03 V/m EP-300 Electric 100 kHz - 3 GHz 300 V/m 0.1 V/m EP-330 Electric 100 kHz - 3 GHz 300 V/m 0.3 V/m EP-301 Electric 100 kHz - 3 GHz 1000 V/m 1 V/m EP-33M Electric 700 MHz - 3 GHz 300 V/m 0.3 V/m EP-44M Electric 100 kHz - 800 MHz 250 V/m 0.25 V/m EP-105 Electric 100 kHz - 1 GHz 50 V/m 0.05 V/m EP-183 Electric 1 MHz - 18 GHz 800 V/m 0.8 V/m EP-408 Electric 1 MHz - 40 GHz 800 V/m 0.8 V/m EP-3DB Electric Dual Band 100 kHz - 3 GHz 100 kHz - 800 MHz 300 V/m 0.3 V/m HP-032 Magnetic 100 kHz - 30 MHz 20 A/m 0.01 A/m HP-102 Magnetic 30 MHz - 1 GHz 20 A/m 0.01 A/m HP-050 Magnetic 10 Hz - 5 kHz 40 uT 10 nT