|
|
|
|

MILITARY
Low frequency signal source DC (0Hz) to 250kHz, 800W
Highlights
- Built-in DDS to generate sinusoidal signals up to 250kHz
- Built-in LF amplifier, 800W
- Output voltage max. 140V p-p, 50V rms
- Output current max. 16A rms
- Supports German Lloyd VI-7-2
- ...
more information
Top
Single-line Artificial Networks (AN) for Emission Measurements in Battery Supply Systems
Highlights
- Artificial Network as per ISO 7637 or CISPR 25/ ISO 11452-4
- Frequency range: 100kHz - 108MHz
- DC voltage max. 400V
- AC voltage max. 250V (up to 1kHz)
- Current max. 50A AC/DC cont.
- ...
more information
Top
Generates and records automotive waveforms
Highlights
- Dual-Processor-Technology, 500kS/s sample rate
- 4-channel arbitrary generator
- 2-channel transient recorder
- Simultaneous recording/generation
- Library of standard test routines
- ...
more information
Top
Audio transformer assembly for LF conducted immunity testing
Highlights
- One-box transformer and 0.5ohm load assembly
- Frequency response 10Hz to 250kHz
- Secondary saturation 50A per transformer
- Audio power 2 x 200W
- Freely configurable on primary/secondary; serial, parallel, single
- ...
more information
Top
Coupling/decoupling assembly for unshielded and shielded high-speed communication lines up to 1GBit/s
Highlights
- Coupling to unshielded and shielded lines with up to 4 pairs
- Surge test voltage up to 4kV (1.2/50us)
- Data transfer up to 1,000MBit/s
- Residual voltage max. 20V at 2kV
- Ringwave test voltage up to 4kV (0.5us/100kHz)
- ...
more information
Top
Calibration Target and verification adapter for ESD
Highlights
- Current target as per IEC/EN 61000-4-2
- 2Ohm impedance +/- 5%
- Test voltage up to 30kV
- Insertion loss +/- 0.5dB up to 1GHz
- Insertion loss +/- 1.2dB up to 4GHz
- ...
more information
Top
Continuous Wave Simulator
Highlights
- Most compact equipment
- Supports BCI testing as per various standard requirements
- Basic frequency range 9kHz up to 400MHz
- Extendable frequency range up to 1GHz
- Built-in 100W class A amplifier up to 400MHz
- ...
more information
Top
Simulator for low frequencies 10 Hz - 250 kHz
Highlights
- Most compact equipment for ripple noise on ac/dc supplies and magnetic fields
- Built-in LF signal generator
- Built-in LF amplifier
- Built-in LF transformer 2:1
- Built-in frequency-selective voltage and current meter
- ...
more information
Top
ESD Simulator
Highlights
- Most ergonomic design
- Light weight (940g)
- Interchangeable discharge tips
- Interchangeable R/C networks
- Power booster to perform long duration tests
- ...
more information
Top
Electrostatic Discharge Simulator up to 30kV
Highlights
- Test voltage up to 30kV for air and contact discharge
- Discharges up to 20Hz
- Easy-to-change R/C-networks and tips
- Bleed-Off function
- Measurement of temperature and humidity
- ...
more information
Top
Single Phase Multifunctional AC/DC Power Sources
Highlights
- Wide Power Bandwidth; DC - 5kHz
- Output Power up to 7,500VA AC and 9,000W DC
- Output Voltage max. 360V AC and +/- 500V DC
- High Inrush Current Capability up to 200A
- Extended trigger and control capabilities (NetWave 7.3)
- ...
more information
Top
Three-phase Multifunctional AC/DC Power Sources
Highlights
- Wide Power Bandwidth; DC - 5kHz
- Output Power up to 60,000VA AC / 72,000W DC
- Output Voltage up to 3*360V AC (p-n), +/-500V DC
- High Inrush Current Capability
- Extended trigger and control capabilities (NetWave 30.2/60.2)
- ...
more information
Top
Voltage Drop Simulator - Battery supply simulation and DC voltage source
Highlights
- Voltage up to 60V
- Current up to 200A (peak up to 1,000A)
- Bipolar-amplifier models available
- Low output impedance
- Powerful DC voltage source
- ...
more information
Top
|
 |
| |
 |
|